Industrial Brake Overhaul Services in Singapore
Based in Singapore, R.I.K. Industries provides industrial brake overhaul and reconditioning services to manufacturers, marine operators and industrial plants across Southeast Asia. Our industrial brake overhaul service covers inspection, cleaning, wear plate and friction lining replacement, and air leak testing, with a documented inspection report at the end of each job. Send in your industrial brake, and R.I.K. will assess it and recondition it to working order.
Type of Industrial Brake Overhaul Services
Our industrial brake overhaul service covers inspection, cleaning, wear plate and friction lining replacement, reassembly and air leak testing, with an inspection report provided at the end of each job.
Brake Received
The brake is received at R.I.K.'s facility and logged for overhaul.
Wear Plate Inspection
The wear plate is inspected for wear, cracking and surface damage.
Wear Plate Disassembly
The wear plate is removed from the brake assembly for cleaning and replacement.
Hydro Jet Cleaned
The brake housing is hydro jet cleaned to remove built-up grease, dirt and corrosion.
Red Oxide Painted
The cleaned housing is coated with red oxide paint to protect against corrosion.
Application of Sealant
Sealant is applied to the wear plate and cylinder seal contact surfaces.
New Wear Plate Assembled and Tested
A new wear plate is fitted and tested for correct seating and seal integrity.
Friction Lining Inspection
The friction lining is inspected for thickness and wear against tolerance.
Friction Lining Disassembled
Worn friction lining is removed from the brake assembly.
New Friction Lining Assembled
New friction lining is fitted and secured to the brake assembly.
Reassembly of Brake
The brake is reassembled with all replaced components in place, as part of the industrial brake overhaul process.
Air Leak Test Piston
The piston is tested for air leaks before the brake proceeds to final checks.
Final Air Leak Test Before Shipment
A final air leak test is carried out on the piston as a last check before the overhauled brake ships.
Overhauled Brake, Ready for Shipment
The overhauled brake is packed and prepared for shipment back to the customer.
Industries We Serve
The following industries commonly rely on industrial brake overhaul services to keep heavy-duty equipment running reliably:
Mining
Brakes on conveyors, crushers, and haulage equipment operate under continuous heavy load and abrasive conditions, requiring regular reconditioning to maintain safe, controlled stopping.
Cement
Brakes on kilns, mills, and material handling equipment are exposed to dust, heat, and constant duty cycles, where overhaul work restores braking performance without full replacement.
Power and Energy
Brakes on turbines, generators, and auxiliary drive systems require periodic inspection and reconditioning to maintain reliable engagement during start-up, shutdown, and load changes.
Marine
Brakes on deck machinery, winches, and propulsion-related equipment are subject to salt air exposure and continuous load cycling, and require overhaul to keep components within manufacturer tolerances.
General Heavy Manufacturing
Brakes on presses, rolling mills, and material handling lines undergo frequent engagement cycles, where overhaul work addresses wear on friction linings and wear plates before failure occurs.
Why Choose R.I.K. Industries for Brake Overhaul?
Regional Presence Across Southeast Asia
R.I.K. Industries operates across Singapore, Thailand, Indonesia, the Philippines, Malaysia and Vietnam, supporting industrial brake overhaul requirements for customers throughout the region.
Authorised Distributor for Reputable Brake Brands
R.I.K. is an authorised distributor for a number of clutch and brake brands, including Danfoss Airflex and Goizper, giving direct access to original manufacturer parts, technical documentation and specification data during overhaul work.
Detailed Inspection & Reporting on Every Overhaul
Each industrial brake overhaul includes an inspection of internal and external components, measurement against manufacturer tolerances, and a written report identifying findings, parts replaced, and recommendations for future maintenance intervals.
Experienced Technicians You Can Trust
Overhaul work is carried out by technicians familiar with the inspection, disassembly, reconditioning and reassembly processes industrial brakes require, so equipment is returned in reliable working condition.
Contact Us for Brake Overhaul
Not too sure if your brake needs an overhaul? Tell us the brake type and the fault you’re seeing, and our engineers will recommend the right course of action.
Contact Us
Frequently Asked Questions About Industrial Brake Overhaul
What does an industrial brake overhaul service include?
Industrial brake overhaul includes receiving the brake, inspecting the wear plate and friction lining, disassembly, hydro jet cleaning, red oxide painting, sealant application, fitting new wear plates and friction linings, reassembly, and air leak testing before the brake is shipped back.
How do I know if my industrial brake needs an overhaul?
Common indicators include reduced braking performance, visible wear on friction linings or wear plates, air leaks around the piston or cylinder seals, and unusual noise during engagement. Manufacturer service intervals specify inspection frequency based on operating hours and should be followed alongside condition-based checks.
How long does an industrial brake overhaul take?
Turnaround depends on the condition of the brake, availability of replacement parts, and the scope of work required. Timelines are confirmed after initial inspection.
Which brake brands and models can R.I.K. overhaul?
R.I.K. Industries is the Authorised Rebuilt Centre for Danfoss (Eaton Airflex), and also carries expertise in servicing Coremo. Overhaul work is carried out using original manufacturer parts and specifications where available. Additional brands may be serviceable on request.
Which industries commonly require industrial brake overhaul services?
Mining, cement, power and energy, marine, and general heavy manufacturing industries commonly require industrial brake overhaul services. See the Industries We Serve section above for how this applies to each.
Does R.I.K. provide an inspection report after the overhaul is complete?
Yes. Each industrial brake overhaul includes a written report detailing inspection findings, parts replaced, and recommendations for future maintenance intervals.
